What is a macuquina coin? Its history and how to identify it
Share with other collectors
At first sight, a macuquina may look damaged, poorly made or even inauthentic. Its shape is often irregular, parts of the design may fall outside the metal, and sometimes the date or the ruler’s name is barely legible.
These were official coins. They were made at the mints of the Hispanic Monarchy and used for centuries in the Americas, Spain and other territories.
Their distinctive appearance comes largely from the way they were made. Each flan was prepared by hand and each coin was struck by hand. Even two coins struck from the same dies can differ visibly in shape, centring, relief and how much of the design is present.
What does “macuquina” actually mean? Where does the name come from? Why are these coins not perfectly round? And should every old hammered coin be called a macuquina?
What is a macuquina coin?
In modern numismatic usage, macuquina generally refers to certain gold and silver coins struck by hammer at Spanish mints in the Americas between the 16th and 18th centuries.
They were made at mints including Mexico, Lima, Potosí, Santa Fe de Nuevo Reino, Cartagena de Indias, Guatemala and Santo Domingo.
The Spanish word ceca means mint, an establishment authorised to strike coins.
The Spanish Ministry of Culture’s Numismatic Thesaurus defines the macuquina as a Spanish gold or silver coin struck by hammer at mints in the Americas. It also notes their often irregular flans and variations in thickness and size. The Royal Spanish Academy offers a broader definition: a cut gold or silver coin that circulated until the mid-19th century.
Silver macuquinas were issued in denominations of half a real, 1 real, 2 reales, 4 reales and 8 reales. Gold issues included 1 escudo and 2, 4 and 8 escudos.
The 8 reales macuquina is probably the best known. These large silver coins circulated widely and today form one of the most popular areas of Spanish-American numismatics.
Why are macuquinas irregular in shape?
Their appearance is best understood by looking at how they were made.
The process began with a piece of gold or silver of the weight required for the denomination. The piece of metal prepared to receive the strike is called a flan.
The flan was not always a perfectly round disc like those used for modern coins. It could be cut or adjusted by hand to reach the prescribed weight, leaving it rounded, square, elongated or quite irregular.
It was then placed between two dies.
A die was a piece of metal engraved with the design in negative. Typically, the lower die was fixed to the anvil, while the upper die was held above the flan and struck with a hammer.
The pressure impressed the designs on both sides of the coin.
If the flan was off centre, moved during striking or received uneven pressure, parts of the design could be weak or fall outside the metal. Sometimes a second blow was needed, producing doubled or displaced images.
Many characteristic features result from this process:
- irregular shapes;
- incomplete legends;
- partially visible dates;
- off-centre shields or crosses;
- weak relief in some areas;
- double strikes;
- small edge cracks.
These irregularities do not necessarily indicate damage. Many coins already looked like this when they left the mint.
Were they official coins?
Yes. Macuquinas were official coins of the Hispanic Monarchy.
Their appearance may seem rudimentary to eyes accustomed to perfectly round coins made with industrial machinery. Yet a macuquina had to meet standards for weight and fineness, at least in theory and within the prescribed tolerances.
Coins often bore marks that identified their origin and helped control their manufacture. These could include:
- the mint mark;
- the assayer’s initial or symbol;
- the denomination;
- the date;
- elements associated with the ruler.
The assayer was responsible for checking the fineness, or purity, of the metal. The assayer’s initial appears on many coins and is one of the most important details in identifying and classifying a macuquina today.
An irregular shape did not in itself imply a lack of oversight. The point was to ensure that each coin contained the quantity and quality of gold or silver prescribed for its denomination, within the limits allowed by the rules and practices of its time.
The uncertain origin of “macuquina”
The precise origin of “macuquina” remains unsettled. Several explanations have been proposed.
The Quechua hypothesis: “the ones that were struck”
One of the most intriguing theories was put forward by the Argentine researcher Arnaldo J. Cunietti-Ferrando.
He suggested that the word might come from Quechua, a language spoken across much of the Andes, including parts of present-day Peru and Bolivia.
Cunietti-Ferrando linked the term to the Quechua root makka or the verb makkay, both associated with striking. Adding the plural suffix -kuna would give makkakuna, meaning “the ones that were struck” or, more explicitly, “those made by striking”.
The name would be apt for coins produced by hammering the dies.
Through usage and contact between Quechua and Spanish, makkakuna may gradually have become “macuquina”.
It is a plausible explanation closely tied to the way the coins were made, but it remains an etymological hypothesis.
Does it come from “macuco”?
Another theory links “macuquina” to the word macuco.
In parts of Chile, Peru and Argentina, the word carried associations of cunning, concealment or deception. Some writers thought it might refer to coins whose irregular shape made it difficult to tell at a glance whether they had lost any metal.
The Spanish Ministry of Culture’s Numismatic Thesaurus suggests that “macuquina” may derive from the Peruvian term macuco, associated with cunning or concealment.
Earlier researchers already wondered whether the relationship might have been the other way round, with macuco acquiring some of its meanings from the coin’s name.
A possible Arabic origin
An Arabic origin has also been suggested. Some writers linked the word to a term transcribed as mahcuc or something similar, meaning “recognised”, “verified” or “sanctioned”.
This theory might refer to a coin whose weight and fineness had been checked. There is too little evidence to regard it as settled.
Coins known as “macacos”
The numismatist Kurt Prober recorded that certain cut, irregular coins were popularly known as “macacos” in Guatemala, in reference to their unattractive or misshapen appearance.
This does not establish that “macuquina” derives from “macaco”. It is best understood as a regional nickname for the coins’ appearance, separate from theories of an Andean origin for “macuquina”.
Are macuquinas and hammered coins the same thing?
The terms are not quite equivalent.
“Hammered” describes a method of manufacture.
“Macuquina” is the name traditionally applied chiefly to certain gold and silver coins struck this way at Spanish mints in the Americas.
For centuries, many mints in the Iberian Peninsula also produced hammered coins. Examples include Burgos, Toledo, Seville, Granada, Madrid and Cuenca. These pieces can have the same irregular shapes, incomplete legends and off-centre designs.
A hammered coin from Burgos or Toledo does not automatically qualify as a macuquina because it is irregular in shape.
“Hammered” tells us how the piece was made. “Macuquina” places it within a distinct numismatic tradition associated mainly with coinage from the Americas.
Usage has never been completely uniform. Some collectors, dealers and authors also refer to “Iberian macuquinas” or “Seville macuquinas”.
The distinction is therefore not absolute. To avoid confusion, Coins2140 generally uses “hammered” for Iberian coins and “macuquina” for American series traditionally known by that name.
How do you identify a macuquina?
There is no single appearance common to all of them. Designs varied by mint, period, denomination and ruler.
Many shield-and-cross macuquinas feature a large shield of the Hispanic Monarchy on one side and a cross with castles and lions on the other.
Other issues, notably certain series of Lima and Potosí, have columns, waves representing the sea, mint marks, dates and assayers’ initials arranged in different parts of the design.
These elements rarely all appear in full. Some may fall outside the flan or have been lost to wear.
To identify a macuquina, the details that remain visible are considered together:
- the style of the cross or shield;
- the mint mark;
- the assayer’s initial;
- the date;
- the denomination;
- the weight;
- the arrangement of letters and symbols.

Sometimes a single letter reveals the mint or assayer. In other cases the coin must be compared with catalogues and known specimens. This challenge is part of their appeal: each macuquina is a small historical puzzle.
Has an irregular macuquina been clipped?
Not necessarily.
A macuquina could be irregular from the moment it was made because its flan had been prepared and adjusted by hand.
Clipping is a separate matter. It meant removing small amounts of silver or gold from the edge after striking. The lack of a regular, protected edge made this easier.
A coin’s lack of roundness alone is insufficient evidence of clipping. Examine its edge, check its weight and look for signs that metal was removed later.
Some pieces, known as galanos, redondos or royals, were made with particular care on more regular flans, with more of the design visible. They show that macuquinas were not necessarily rough or highly irregular.
Are all macuquinas valuable?
Age, irregularity and classification as a macuquina do not automatically make a coin rare or valuable.
Prices can vary considerably depending on:
- the mint;
- the ruler;
- the year;
- the assayer;
- the face value;
- the rarity of the issue;
- the surviving weight;
- how much of the design is visible;
- the grade;
- the presence of countermarks or varieties;
- the historical provenance.
Some macuquinas are relatively common and affordable, while others are extremely rare and can command very high prices.
Legibility matters too. Between two coins of the same type, collectors often value the one with a clearer mint, date, assayer and main design elements.
A distinctive kind of coin
Macuquinas were made by hand in a system where the weight and fineness of the metal mattered more in practice than a perfectly round shape.
Every blow, movement of the flan and adjustment by a mint worker could leave a different trace. Two coins made with the same dies can thus look strikingly different.
They also preserve a history that links the mines of the Americas, the major mints of Mexico, Lima and Potosí, and the trade routes of the Hispanic Monarchy.
Questions remain even about the name. It could come from a Quechua expression meaning “the ones that were struck”, from macuco or from Arabic. Guatemala’s “macacos” add another chapter to the story.
“Macuquina” and “hammered” are not interchangeable. All macuquinas were struck by hand, but the name does not automatically apply to every hammered coin.
Understanding the distinction gives us another way to see these coins, as distinctive records of the technology, economy and history of the Hispanic Monarchy.
Explore our selection of Spanish Habsburg coins, with pieces from different mints, denominations and metals, each individually studied and photographed.
About the author
Albert Pujol Miguel founded Coins2140 and specialises in the coinage of the Hispanic Monarchy, with a focus on hammered issues of the Spanish Habsburgs.
Sources and bibliography
- Spanish Ministry of Culture, Tesauro de Numismática, entries “Macuquina”, “Acuñación a martillo”, “Cospel” and “Cuño”.
- Royal Spanish Academy, Diccionario de la lengua española, entry “macuquino”.
- Cunietti-Ferrando, Arnaldo J., “La voz kechwa ‘macuquina’ aplicada a monedas cortadas de Potosí y Lima”, UNAN Numismática, no. 4.
- Medina, José Toribio, Las monedas coloniales hispano-americanas, Santiago de Chile, 1919.
- Prober, Kurt, Historia Numismática de Guatemala, Guatemala, 1947.
- Cano Borrego, Pedro Damián, “Galanos, redondos o Royals: las macuquinas más bellas”, El Sitio, no. 31, 2019.